79 found, showing page 4 of 6
Freud 36-114 3/8 In. Quadra-Cut Radius Beading Router Bit
PRODUCT OVERVIEW
Bits will produce an attractive bead profile to furniture and millwork. Special shear angle causes the bit to slice the wood for a clean cut every time. Cut composition materials, plywood, hard wood and soft woods. Use on hand held and table mounted portable routers. Nos. 36-110 and 36-112, 1/2'' small diameter. 3/8" bearing diameter.
Product Details
Bearing Diameter:3/8 in
Cutter Diameter:1-3/8 in
Cutting Depth:5/8 in
Material:Carbide
Number of Cutters:4
Overall Length:2-3/16 in
Shank Diameter:1/4 in
Suitable for:Handheld and Table-Mounted Portable Routers
View Details
$39.99
Freud 38-100 1 And 1/16 Inch Carbide Roman Ogee Router Bit For Woodworking
PRODUCT OVERVIEW
Profile can be changed by changing the height of bit. Cuts all composition materials, plywood, hard wood and soft wood. Use on hand held and table mounted portable routers. 3/8" bearing diameter.
Product Details
Bearing Diameter:3/8 in
Cutter Diameter:1-1/16 in
Cutting Depth:1/2 in
Material:Carbide
Number of Cutters:4
Overall Length:2-3/16 in
Shank Diameter:1/4 in
Suitable for:Handheld and Table-Mounted Routers
View Details
$49.99
Freud 38-102 1-3/8 Inch Diameter Roman Ogee Bit with 1/4 Inch Shank
PRODUCT OVERVIEW
Profile can be changed by changing the height of bit. Cuts all composition materials, plywood, hard wood and soft wood. Use on hand held and table mounted portable routers. 3/8" bearing diameter.
Product Details
Bearing Diameter:3/8 in
Cutter Diameter:1-3/8 in
Cutting Depth:23/32 in
Material:Carbide
Number of Cutters:4
Overall Length:2-3/8 in
Shank Diameter:1/4 in
Suitable for:Handheld and Table-Mounted Routers
View Details
$54.99
Freud 38-352 Router Bit, 1-5/8 in Dia Cutter, 2-5/16 in OAL, 1/4 in Dia Shank, 4-Cutter, Carbide
PRODUCT OVERVIEW
Computer balancing of bits will insure a smooth vibration free cut. Cuts all composition materials, plywood, hardwood and softwood. Use on handheld and table-mounted portable routers. 1/2 in bearing Dia.
Product Details
Bearing Diameter:5/8 in
Cutter Diameter:1-5/8 in
Cutting Depth:5/8 in
Material:Carbide
Number of Cutters:4
Overall Length:2-5/16 in
Shank Diameter:1/4 in
Suitable for:Handheld and Table-Mounted Routers
Features
Cuts all composition materials, plywoods, hardwoods and softwoods
Add distinctive design to cabinets, furniture, plaques and millwork with these decorative edging bits
View Details
$59.99
Freud 40-104 Chamfer Router Bit, 1-11/32 in Dia Cutter, 1/2 in L Cutting, 2-3/16 in OAL, 1/4 in Dia
PRODUCT OVERVIEW
The chamfer profile seems simple, but it is a great solution for lots of multiple-sided projects, joinery and easing edges. Creates a uniform chamfer on the edge of any work piece to add character, while retaining crisp geometric lines. #40-094 makes 16-sided pieces and #40-098 makes 12-sided pieces. Routs hardwood, softwood, plywood and composites; use in hand-held or table-mounted portable routers.
Product Details
Angle:45 deg
Applicable Materials:Composites Hardwood Plywood Softwood
Bearing Diameter:1/2 in
Color:Red
Cutter Diameter:1-11/32 in
Cutting Depth:1/2 in
Cutting Length:1/2 in
Finish:Perma-Shield
Material:Carbide
Number of Cutters:2
Overall Length:2-3/16 in
Shank Diameter:1/4 in
Suitable for:Handheld and Table-Mounted Portable Routers
Features
Chamfer size easily adjusts by changing the height of the bit or moving the fence
View Details
$37.99
Freud 40-106 1-3/4 Inch 45 Degree Chamfer Bit
PRODUCT OVERVIEW
Chamfer size is easily adjusted by changing the height of the bit. Cut all composition materials, plywood, hard wood and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing diameter.
Product Details
Angle:45 deg
Bearing Diameter:1/2 in
Cutter Diameter:1-3/4 in
Cutting Depth:5/8 in
Material:Carbide
Number of Cutters:2
Overall Length:2-3/16 in
Shank Diameter:1/4 in
Suitable for:Handheld and Table-Mounted Portable Routers
View Details
$54.99
Freud 42-100 Bearing Flush Trim Bit, 3/8 in Dia Cutter, 1 in L Cutting, 2-13/16 in OAL, 1/4 in Dia S
PRODUCT OVERVIEW
Freud's flush trim bit range includes bits for any trimming application. Use these bits for precise trim work on laminate counter tops, to follow patterns to create or duplicate intricate shapes or for any task requiring a clean cut-off along a flush edge.
Product Details
Applicable Materials:Hardwood Plywood Softwood
Bearing Diameter:3/8 in
Cutter Diameter:3/8 in
Cutting Length:1 in
Material:Carbide
Number of Cutters:2
Overall Length:2-13/16 in
Shank Diameter:1/4 in
Features
Use on hand-held and table-mounted routers
Freud Perma-SHIELD(R) coating
View Details
$29.99
Freud 42-104 Router Bit 1/2" D X 1/2" X 2-13/16" L Carbide Bearing Flush Trim
PRODUCT OVERVIEW
Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8" bearing. Ground carbide with titanium for long life. Anti-kickback.
Product Details
Applicable Materials:Hardwood Plywood Softwood
Bearing Diameter:1/2 in
Cutter Diameter:1/2 in
Cutting Depth:1 in
Material:Carbide
Number of Cutters:2
Overall Length:2-13/16 in
Shank Diameter:1/4 in
Suitable for:Portable or Table-Mounted Routers
View Details
$32.99
Freud 42-106 Flush Trim Bit, 1/2 in Dia Cutter, 2-1/8 in OAL, 1/4 in Dia Shank, 2-Cutter, Carbide
PRODUCT OVERVIEW
Freud's flush trim bit range includes bits for any trimming application. Use these bits for precise trim work on laminate counter tops, to follow patterns to create or duplicate intricate shapes or for any task requiring a clean cut-off along a flush edge with a smooth, burn-free cut. Use on hardwood, softwood, plywood, composites and laminates on hand held or table mounted routers. Two flute bits provide faster cutting and three flutes yield a superior finish.
Product Details
Applicable Materials:Hardwood Softwood Veneered Plywood
Bearing Diameter:1/2 in
Cutter Diameter:1/2 in
Cutting Depth:1/2 in
Material:Carbide
Number of Cutters:2
Overall Length:2-1/8 in
Shank Diameter:1/4 in
Suitable for:Portable or Table-Mounted Routers
Features
Cuts all composition materials, plywoods, hardwoods and softwoods
Use on hand held or table mounted routers
Freud Perma-SHIELD(R) coating
Trimming laminates and routing along patterns
View Details
$25.99
Freud 42-110 1/2 Inch Diameter 2 Flute Flush Trimming Router Bit with 1/2 Inch Shank
PRODUCT OVERVIEW
Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8" bearing. Ground carbide with titanium for long life. Anti-kickback.
Product Details
Applicable Materials:Hardwood Plywood Softwood
Bearing Diameter:1/2 in
Cutter Diameter:1/2 in
Cutting Depth:1 in
Material:Carbide
Number of Cutters:2
Overall Length:3-1/4 in
Shank Diameter:1/2 in
Suitable for:Portable or Table-Mounted Routers
View Details
$29.99
Freud 44-100 1/2 Inch Bearing Flush Trim Bit
PRODUCT OVERVIEW
Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8" bearing. Ground carbide with titanium for long life. Anti-kickback.
Product Details
Bearing Diameter:1/2 in
Cutting Depth:1 in
Material:Carbide
Overall Length:2-13/16 in
Shank Diameter:1/4 in
Suitable for:Portable or Table-Mounted Routers
View Details
$39.99
Freud 50-102 Flush Trim Bit, 1/2 in Dia Cutter, 1 in L Cutting, 2-5/8 in OAL, 1/4 in Dia Shank, 2-Cu
PRODUCT OVERVIEW
Ideal for following templates, routing sign lettering and other tasks where the pattern is placed on top of the work piece. The top mounted bearings on these bits make them ideal for almost any application where the work piece is being grooved or routed.
Product Details
Applicable Materials:Hardwood Plywood Softwood
Bearing Diameter:1/2 in
Cutter Diameter:1/2 in
Cutting Length:1 in
Material:Carbide
Number of Cutters:2
Overall Length:2-5/8 in
Shank Diameter:1/4 in
Features
Use on hand-held and table-mounted routers
Freud Perma-SHIELD(R) coating
View Details
$32.99
Freud 56-112 1/4 In. Slot Three Wing Slotting Cutter
PRODUCT OVERVIEW
Produce a precision slot for T-moldings, spline joints, or many other applications. Bodies are heat treated for strength and are computer balanced for vibration free operation. Should be used with No. 60-100 slotted cutting arbor. Cuts all composition materials, plywood, hard wood and soft wood.
Product Details
Cutting Depth:9/16 in
Material:Carbide
Suitable for:Handheld and Table-Mounted Portable Routers
View Details
$27.99
Freud 60-100 Slotting Cutter Arbor, 25/64 in OAL, 1/4 in Dia Shank, Carbide
PRODUCT OVERVIEW
"Slotting cutter arbors will work with any slotting cutter with a 5/16"" arbor. Use on hand held and table mounted portable routers."
Product Details
Material:Carbide
Overall Length:25/64 in
Shank Diameter:1/4 in
Suitable for:Handheld and Table-Mounted Portable Routers
View Details
$11.99
Freud 62-XXX Ball Bearing Set, Metal
PRODUCT OVERVIEW
Freud Ball Bearing Set, Metal, Includes: (1) 1/8 x 3/8 in, (1) 2.5 mm Wrench, (1) 3/16 x 1/2 in, (1) 3/16 x 3/8 in, (1) 8 x 22 mm Bearing
Product Details
Includes:(1) 1/8 x 3/8 in (1) 2.5 mm Wrench (1) 3/16 x 1/2 in (1) 3/16 x 3/8 in (1) 8 x 22 mm Bearing
Material:Metal
Features
Lubricated with a high-temperature lubricant to withstand the stresses of turning at 22,000 rpm
Shielded to keep out the unwanted wood dust and chips that greatly reduce bearing life
Freud router bits feature excellent quality ball bearings
View Details
$39.99
